Hacker Newsnew | past | comments | ask | show | jobs | submit | shocks's commentslogin

You’re reading too much into it.


Meaning you dont think it has anything to do with an inferiority complex or need to be special? I would call that more of a loose hypothesis than a firm theory. I am very much wondering why. That's just some speculation.



Can you elaborate? It is a question, because I'm curious, but clearly not all questions are hinting at some conspiracy. What conspiracy do you think I'm hinting at?


>If criticized, the proponent of such a claim may then defend themselves by asserting they were merely asking questions

hope you're OK.


Just shoot film.


Us British have a unique relationship with profanity as a way to communicate.

edit: Aussies and kiwis too!


> I am ok assembling the machine and learning how to dial it in.

Get a Prusa Core One kit, or build a Voron.

Bambulab should be off the table for their bait and switch behaviour. AMS is not particularly impressive and very wasteful. Get a Bondtech INDX down the road if you want true multi material printing.


This is a great choice if you want to learn how to be a technician for your 3D printer. It will probably save you on filament cost as well.


What is their bait and switch behavior? I'm not familiar with anything shady they've done but am very curious as I've had my eye on a Bambu.


They pushed a firmware update which blocked direct use of your printer without using their proprietary “Bambu Connect” application - because ‘security’.


LAN mode still works on my A1 & I can access it from Orca Slicer just fine.


I've been unable to connect Orca Slicer to my A1 mini over LAN and I'm led to believe that as a result of that firmware update it is impossible. It's possible something else went wrong and I just gave up because of a misunderstanding I guess?

Are you sure you aren't just running older firmware (my A1 mini is a recent acquisition)?



Same on my P1S. LAN mode doesn't even attempt to call home at all either, I've checked my logs. And even if you're super paranoid you can always walk an SD Card to the printer.


Mind clarifying how that's bad? It sounds just like a driver or something similar.


Authorization through bambulab servers.

Also probably AGPL infringement, since the slicer is a fork of priser slicer which is AGPL, and you can't build the slicer from source, because if you could, then you could use the binary plugin for communicating with the printer in other slicers -- but you can't.

It's pretty blatant IMO.

But it's also a printer that just works.


Incorrect. Author may not have had the required savings to rebuy the position he wanted.


The author can simply buy a "position" in Monopoly Money instead. It's just as useful as cryptocurrency, and as a bonus harder to steal!


But harder to resell for a multiple of the buying price later.


Jellyfin (server), Finamp (iOS client) and Tauon (Linux client) for me.


I'm a fan of keeping music videos and playing them on the background but VLC has been crappy and the default video player doesn't like older formats.

Do you have any recommendations?


Nope, sorry. :(


My setup exactly. No setup needed for those already hosting Jellyfin.


I can recommend the Finamp beta if you've not tried it already!


My kit got shipped yesterday. Super excited!


I have a bright coloured car and it’s easy to find in the car park!


My partner has a lot of tattoos.

She has vitiligo so has little control over how she looks. Tattoos make her confident and give her back control.

You should judge people less.


My partner also has tattoos. I think people online pretend to be better than they are for some reason. I'm willing to bet every single offended person that is pointing the finger at the bad man that judges tattoos equally judges other meaningless things. At least I'm aware of it and try to keep it to myself and re-evaluate it every once in a while, instead of pretending I never have a bad thought.


You might want to revisit the meaning of keeping it to yourself.

The existence of hypocrisy doesn’t excuse you from fault for trying to offend every person with a tattoo.


Online discussion isn't the real world. I'm sharing thoughts in the spirit of positive discussion and didn't offend anyone.

Me thinking someone has low impulse control isn't an offense. Me telling them they have low impulse control is an offense (i never said this to anyone). Me being honest about the thought that came into my mind in a discussion board is also not an offense. And I cannot control the thoughts that come to my mind, only my actions after. If anything I learned to keep my mouth shut from this thread, it's the first and last time I discuss tattoos.


I get what you're saying. sadly the Internet is no longer the place it once was. People are just looking for ways to get offended and go off and try and cancel people. thinking things isn't doing things. thinking evil thoughts but not acting on them is entirely fine and normal and human.

people have four levels of being, there's conscious you, lizard brain, addict brain, and ideal brain. lizard brain gets the most time. it's the baser sider of things that we can't help, like who we're attracted to (masc/femme/nb) or what we think of people with tattoos. Then there's conscious brain. that's the part of us that's rational and can recognize that lizard brain does and thinks dumb things. addict brain is where there's something you're addicted to. chemical/digital/physical; whatever. addict brain will rationalize that something that conscious brain knows is wrong into being okay. Oh it's just $10 dollars and it's only Candy crush. idea brain is who you are after an interaction has happened, when you win the argument in the shower or wake up knowing the solution to a problem. sometimes idea brain will happen in the moment, but most of the time it happens later.

anyway, we can't help lizard brain, especially when we're sleep deprived, high/drunk/groggy/strongly emotional, and it can say some horrible shit. some people are able to acknowledge that this happens to everyone and exists and is human and forgive other people when they do something, others pretend like that they're not like that and that it never happens to them.

This is the divide between introvert and extrovert, btw. introverts can't "mask off" around other people, so being around other people is exhausting for them. if they say they don't belive something but that this thought still happens, eg that people with tattoos are impulsive, they get excoriated for voicing having had the thought.

sadly, as you've found, the open Internet just isn't the place for that. thankfully, there are small private communities where people do understand such detail and nuance, but they're hard to find.

cards on the table though, my current tattoo wasn't the result of much planning, but having gotten one, I more respect the time and effort that goes into getting really good ones.

on my wish list is the https://imprintu.com/ temporary tattoo printer, which seems fun.


> I find it a good litmus test for people. If you want to broadcast your low impulse control and bad decision making history, be my guest.

I can't find a way to read OP's comment that isn't derisive. I don't see we get "I just want a discussion" out of it.


> People are just looking for ways to get offended

Except I didn’t get offended.

Note that the parent hasn’t responded to the alternative perspective I offered; so I don’t really buy the “I’m here for discussion” spiel.


Nobody here claimed to be better than you; you just got called out for your judgemental comment.

I’ve offered a perspective that you may not have seen before.


I use https://miniflux.app/ to consume YT. Works great.


Guidelines | FAQ | Lists | API | Security | Legal | Apply to YC | Contact

Search: