According to Hardware Unboxed this problem goes away with the new generation displays. They are switching over to using a standard (LCD-like) striped pixel layout.
Must say my first generation Samsung display looks amazing both for gaming and programming though. If it wasn’t for the annoying smart-tv stuff, and the mini connectors, it’s a perfect monitor.
If only the PG34WCDN was actually available.. Asus appears to be very tight-lipped about when it will even go on sale.
There are three upcoming monitors that take advantage of this new Samsung ultrawide 360Hz V-Stripe QD-OLED monitor- the Asus ROG Swift PG34WCDN, MSI 341CQR X36, and the Gigabyte MO34WQC36. They are all roughly on-par, with the exception of MSI, who cheaped out on their DisplayPort 1.2a specification (UHBR13.5 instead of UHBR20) requiring the use of DSC to drive the 3440x1440 resolution at the full native refresh rate of 360Hz.
I have decided it is time to update my aging Asus PG348 34" Ultrawide (which has been one of the best monitors I've ever owned, and served me very well) - and will be replacing it with the PG34WCDN as soon as it is available.
> Within the past few weeks LG has announced RGB stripe OLED panels which will resolve this problem, but there aren’t currently any monitors available using these panels
3440x1440 @ 34" (110ppi): Asus PG34WCDN, Asus XG34WCDMS, MSI MEG X, MSI MPG 341CQR X36
Digging into this further, I also found another Asus panel that's closer, if not all the way there yet (5K would be, but this is 4K) to the usual Mac pixel densities:
3840x2160 @ 27" (163ppi): Asus PG27UCWM
I'll still be waiting for 5K @ 27" with the new tech, but I'm really glad to see they finally solved this!
Huu. I had the opposite experience almost. I’m a complete Linux noob. Could not get Bazzite to work as expected. Had much better luck with Arch though the install was a bit archaic. Managed to get a desktop and Steam installed with all drivers on the second attempt (which wasn’t to bad since Arch is a fast install.) It has worked flawless since. Absolutely zero bloat.
The problem isn’t Norway. The problem is everywhere else allowing the amassing of incredible wealth with suspiciously low taxation. But we can’t even agree on a common minimum corporate tax. So yeah. Go Norway. Shame on everyone else.
I don’t think you’ve used KiCAD. Simply add an MPN attribute to your component and that is it. Use the built in BOM editor and exporter. Done. There are certainly ways to misuse any advanced software. But it definitely can and will produce a complete BOM without additional add-ons. Grated, the exporter is limited to CSV files. So I’m guessing your workflow requires something more interesting?
> Simply add an MPN attribute to your component and that is it.
No, that's the problem, right there. KiCad doesn't have a parts library. KiCad has schematic elements you can manually tack parameters on to. And everyone does it slightly differently!
There's no way to have a set of parts you can select from that are guaranteed-approved (because we used them previously or whatever). There's no way to have the software just show you the entire E24+E96 series of standard 0603 resistors so you can just grab one and go and know that it's orderable. There's no way to be able to get that confusing series of diode footprints and orientations right once and store it forever so the software gets it right for you from now on. (Diodes are the worst. At least Panasonic got out of the diode business. And, yes, I was thinking of their product line when I said that.)
Yeah, sure, you can do anything by tacking parameters on schematic components. Sometimes you even have to do that. Just like programming in assembly: there's no job it can't do. But sometimes you really need a little bit more, right?
And that's notwithstanding the fact that many people who use KiCad, like our article author here, don't even bother to tag parts with an MPN parameter! That's a cultural issue, but it is one the software can and should be pushing back on.
The nice thing with KiCAD is that a part is simply a symbol (schematic element) with enough parameters attached. You can specify footprints, MPN, ratings, value, etc. then store it in your approved and verified symbol library for use in all your projects. Use your R_4.7k_0603 symbol an it comes preconfigured with footprint, MPN, rating etc. Making these symbols is a lot of work but very simple.
Unfortunately there is no standard name for these parameters beyond footprint, value and some others. MPN, brand, rating etc. are not default. This hinders bigger adoption I think, and makes every project unique. This should be improved.
I find it fascinating that the same is true for frame rate. Some people think 60Hz is OK, while anyone who has tried a 120Hz screen will agree it is infinitely smoother. The same is true again for a 240Hz screen. I have yet to try a 480Hz screen but imagine the jump will be equally impressive.
On that note, my last PCBway order took four weeks to arrive. Dunno if it was a random fluke, but it sure came with more border regulations incantations attached to the box than usual.
Just had to quickly find replacement for all NXP stuff we were using on a prototype board already sent to assembly. Good that we aren't using their MCU, only some discretes. And good that we git a proper B2B contact so it was polite warning rather than being ghosted like PCBway did to some hobbyists out there.
Wait, hold on. Is this actually an issue that needs a solution? It feels like Wayland is doing something very stupid here. Why not let apps control their windows? I cannot remember when an app stole focus last time. The only time this makes sense is while entering a password. But that is a very specific case that can be solved by having the password dialog on a protected desktop (ie. one with only that single window.)
> I cannot remember when an app stole focus last time.
You must not use Windows where every application comes with its own auto-updater, often stealing focus and minimizing your game once when the updater pops up, and then again when it restarts the main application it just updated.
Devs can't be trusted to not turn their users homicidal. Someone has to stop them for their own good.
This is purely anecdotal, but I think I’ve seen ChatGPT insert special space characters other than normal space. It also likes to use the different dash characters (en, em and hyphen) more than would appear in normal text.
I don’t understand why electrical grids are so problematic, but they seem plagued by corruption, incompetence, and poor planning everywhere.
Here in Sweden the grids was built by taxpayers and then sold off to a private company for maintenance and operation. That went as well as you can expect. Future development and growth is basically impossible as the private company has zero incentive or interest in laying new wire or upgrading old.
When you turn energy generation into a market, it opens up the possibility for huge amounts of money to be made by big players constraining supply at just the right times. Of course if properly competitive markets existed outside econ textbook models, it would solve itself, but unfortunately the barrier to entry is too high in the real world so competition is always limited to a few players who try to get as large as possible (gobbling up any smaller ones in the process).
This kind of profiteering by intentionally constraining supply when there was very high demand was literally something Enron became infamous for, but it still happens all around the world.
Of course, on the transmission and distribution side you can’t even try to have a market and there is always a natural monopoly, it’d just be impossible for anyone to overbuild a new grid in any service area. So turning a state-owned natural monopoly into a private one tends to turn out just as badly as anyone could expect…
https://youtu.be/c90FLTWQiSY
Must say my first generation Samsung display looks amazing both for gaming and programming though. If it wasn’t for the annoying smart-tv stuff, and the mini connectors, it’s a perfect monitor.
reply