Hey. Let me walk you through the Donnelly nut spacing and crack system rim-riding rip configuration. Using a field of half-C sprats, and brass-fitted nickel slits, our bracketed caps, and splay-flexed brace columns vent dampers to dampening hatch depths of one half meter from the damper crown to the spurve plinths. How? Well, we bolster twelve husk nuts to each girdle-jerry, while flex tandems press a task apparatus of ten vertically composited patch-hamplers. Then, pin-flam-fastened pan traps at both maiden-apexes of the jim-joist.
The original machine has a base-plate of prefabulated aluminite, surmounted by a malleable logarithmic casing in such a way that the two main spurving bearings were in a direct line with the pentametric fan. The latter consisted simply of six hydrocoptic marzlevanes, so fitted to the ambifacient lunar waneshaft that side fumbling was effectively prevented. The main winding was of the normal lotus-o-delta type placed in panendermic semi-bovoid slots in the stator, every seventh conductor being connected by a non-reversible tremie pipe to the differential girdlespring on the "up" end of the grammeters.
